How to hire welders and CNC machinists in 2026 comes down to three moves: advertise where working tradespeople scroll, screen knowledge before you pay for a weld test, and make the offer fast enough to beat the shop down the road. The shortage isn't local. The EURES/ELA report on labour shortages and surpluses 2025, published June 2026, has welders and flame cutters in shortage in 22 of 28 reporting countries, and only two report a surplus. In Croatia, HZZ's January 2026 list puts welders and machine-processing operators among the deficit trades. If you're planning 2027 headcount this quarter, here is what works.
- Welders and flame cutters are a shortage occupation in 22 of 28 EURES countries, and 73 per cent of those reports are rated medium or high severity (EURES/ELA report, June 2026).
- Croatia had 62,595 registered unemployed at 30-09-2026 and 16,745 open HZZ vacancies as of 27 October 2026, so the welders you want are working, not waiting.
- A two-minute knowledge quiz on process, position and drawing reading decides who earns a weld test; it does not replace the test.
- An EN ISO 9606 certificate is verified against the original document and the issuing body, never against a quiz answer.
How short are welders and CNC operators, really?
Short everywhere, and for years. The EURES/ELA report on labour shortages and surpluses 2025, published June 2026, lists welders and flame cutters as a shortage occupation in 22 of the 28 countries that submitted data. Of those reports, 73 per cent are rated medium or high severity and 32 per cent high, and the report notes welders have stayed high on the list over recent years. The same table lists metal working machine tool setters and operators among the widespread shortages, with sheet metal workers in 19 of 28 countries. That's your CNC side.
Croatia mirrors it. HZZ's 2026 enrolment recommendations, published 21-01-2026, put welders and machine-processing operators (operater za strojne obrade) on the deficit list. Glas Slavonije (30-09-2026) reports trade-school enrolment up more than 35 per cent in certain Slavonian counties, a Ministry of Economy grant of EUR 2,400 per pupil per school year in deficit trades, and welders and locksmiths still recurring in every Slavonian county's deficit list, with CNC operators named in the machinery group. Those pupils are three years away. Your 2027 rota isn't.
Where do you find welders in 2026?
Not on the unemployment register. HZZ counted 62,595 registered unemployed at 30-09-2026, a registered unemployment rate of 3.4 per cent, against 16,745 vacancies open through HZZ as of 27 October 2026 and 177,529 posted between January and September. The welders you want are employed, on a phone during a break, not refreshing job boards. The sourcing basics for production staff apply here with one twist: your ad must give someone who already has a job a clear reason to move.
The second pool is across a border. The EURES/ELA report finds 98 per cent of occupations in shortage in one country are in surplus in another, so a Croatian shop and a welder in a surplus market are looking for each other. EURES's country profile (updated 24-02-2025) records 8.7 per cent of Croatia's 2023 active workforce coming from third countries against 1.9 per cent from other EU states. Non-EU hires need a MUP residence and work permit under HZZ's labour market test rules, which this guide to hiring from outside the EU walks through. Advertise in the candidate's own language, not just Croatian and English.

What should you screen before you pay for a weld test?
A weld test costs plate, gas, wire, an hour of your foreman and often a day's pay for the candidate. Don't run it for everyone whose message says ten years' experience. Screen knowledge first, in two minutes, on the candidate's phone, and let the answers decide who earns a test. Five topics carry most of it:
- Process: which of MIG/MAG, TIG and MMA they run daily, and on what thickness.
- Position: vertical-up (PF) and overhead (PE), or flat and horizontal only.
- Drawings: read a weld symbol and a tolerance off a simple detail.
- CNC basics: what G01 does, how to set a work offset, what tool wear looks like on a part.
- Materials: preheat on thick carbon steel, why stainless gets its own brush.
Grade the answers yourself and treat time per question as part of the score, because someone who has done it answers in seconds. Timed skills tests tell you more than a CV. When the timing on one question or a tab switch looks odd, that's a reason to ask about it at interview, not a verdict on the person.
Take an invented shop, call it Metalika, planning 2027 headcount in October. It turns one job description into a quiz ad in Croatian, Bosnian and Ukrainian and puts EUR 400 behind it for two weeks. The numbers below are illustrative, drawn from Qwiza demo campaigns and pilot targets, not client results.
Around 180 people open the quiz, 120 finish it, and 34 clear the foreman's threshold on process, position and drawing questions. Twelve get a call, nine come in for a coupon test, five pass, three accept. Total: two welders and a CNC operator in under four weeks, weld tests run for nine people instead of forty, and a talent pool of twenty-odd near-misses ready for the next order.
How do you verify certificates and CNC skill?
A quiz can't verify an EN ISO 9606 certificate, and neither can a photo on WhatsApp. The certificate names a process, a material group, a thickness range and positions, and it carries an expiry and revalidation date. Ask for the original, check the issuing body, and match the scope to the joints you make. A welder qualified on plate in the flat position is not qualified for your pipework.
Then the practical. For welders, one coupon in the hardest position the job needs, cut and inspected the same day. For CNC, half an hour on the actual machine: read the drawing, set the offset, run a first-off, measure it. Keep the bar identical for every candidate and write the result down. The person who was borderline today is your first call when the next order lands.
How do you make the offer before the next shop does?
Speed. With 16,745 open HZZ vacancies chasing 62,595 registered unemployed, the welder who passed your test on Tuesday has another offer by Friday. Book the interview while the candidate is still warm, put it straight into the foreman's calendar, and send a written offer within a day of the test. Slow offers lose finished hires, and nowhere faster than in the trades.
Say the pay. Say the shift pattern, the overtime rules, who pays for gear and travel, and whether the work is shop or site. A welder who left a cold hall and unpaid overtime won't move for the word competitive. If you run quiz ads, one job description becomes the Instagram ad, the two-minute quiz and the scored shortlist, and the interview lands in the foreman's calendar with overlap warnings; in Qwiza that's one flow.
And grow your own. Apprentices and trainees are the only pool that gets bigger next year, and the enrolment numbers say more of them are on the way.
Screen welders before the weld test
Turn your welder or CNC job description into a two-minute quiz ad, see who knows the trade, and book the test with the right people. First campaign free.
Try the live demoFrequently asked questions
Can a screening quiz replace the EN ISO 9606 weld test?
No. A quiz checks whether someone knows the trade: which process they run, which positions they're qualified in, how to read a weld symbol. It cannot confirm a certificate exists, is in date or covers your joints. EN ISO 9606 qualifications are tied to a process, material group and position range and need revalidation, so check the original document with the issuing body. Use the quiz to decide who gets a weld test, then run one coupon in the hardest position the job needs. That cuts the number of tests, not the standard.
Where do you find welders when registered unemployment is 3.4 per cent?
Mostly in other people's shops. HZZ counted 62,595 registered unemployed at 30-09-2026 against 16,745 open vacancies as of 27 October 2026, so the pool of ready welders sitting at home is small. The welders you want are employed and will only move for clear pay, a stated shift pattern and a fast process. Reach them where they are, on Instagram and Facebook during breaks, with an ad that asks trade questions rather than for a CV. The second pool is abroad: the EURES/ELA 2025 report finds 98 per cent of shortage occupations are in surplus somewhere else in Europe.
How do I hire a welder from outside the EU for a Croatian shop?
You need a residence and work permit from MUP, issued under HZZ's labour market test rules, before the welder can start. Croatia already relies on this route: EURES's country profile records 8.7 per cent of the 2023 active workforce coming from third countries. Advertise in the candidate's own language, screen knowledge with a quiz before you commit to the paperwork, and verify the welding certificate against the issuing body, since qualifications from outside the EU may need re-testing to EN ISO 9606. Plan the start date around the permit processing time, not around the day the candidate said yes.


